Product Name: Bleach Replenisher Part A 20N2-2235A Page: 1 of 4 This revision issued: September, 2007 SECTION 1 - IDENTIFICATION OF CHEMICAL PRODUCT AND COMPANY Independent Photographic Supplies Pty Ltd Phone 02 9875 2244 Fax 02 9875 5448 PO Box 317 Thornleigh, NSW 2120 Email: email@example.com Substance: Trade Name: Bleach Replenisher Part A Product Code: 20N2-2235 Product Use: Creation Date: September, 2006 Revision Date: September, 2007 SECTION 2 - HAZARDS IDENTIFICATION Statement of Hazardous Nature This product is classified as: Xi, Irritating. Hazardous according to the criteria of ASCC.
Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code.
Risk Phrases: R36. Irritating to eyes. Safety Phrases: S25, S45, S24/25. Avoid contact with eyes. In case of accident or if you feel unwell, contact a doctor or Poisons Information Centre immediately (show the label where possible). Avoid contact with skin and eyes. SUSDP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good under the ADG Code. UN Number: None allocated Emergency Overview Physical Description & colour: Clear, colourless liquid. Odour: No odour. Major Health Hazards: eye irritant. Potential Health Effects Inhalation: Short term exposure: Available data indicates that this product is not harmful. However product may be mildly irritating, although unlikely to cause anything more than mild transient discomfort. Long Term exposure: No data for health effects associated with long term inhalation. Skin Contact: Short term exposure: Available data indicates that this product is not harmful. It should present no hazards in normal use. However product may be irritating, but is unlikely to cause anything more than mild transient discomfort. Long Term exposure: No data for health effects associated with long term skin exposure. Eye Contact: Short term exposure: This product is an eye irritant. Symptoms may include stinging and reddening of eyes and watering which may become copious. Other symptoms may also become evident. If exposure is brief, symptoms should disappear once exposure has ceased. However, lengthy exposure or delayed treatment may cause permanent damage. Long Term exposure: No data for health effects associated with long term eye exposure. Ingestion: Short term exposure: Significant oral exposure is considered to be unlikely. However, this product may be irritating to mucous membranes but is unlikely to cause anything more than transient discomfort. Long Term exposure: No data for health effects associated with long term ingestion. Carcinogen Status: ASCC: No significant ingredient is classified as carcinogenic by ASCC. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC. MATERIAL SAFETY DATA SHEET
Issued by: Independent Photographic Supplies Pty Ltd
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand) Product Name: Bleach Replenisher Part A 20N2-2235A Page: 2 of 4 This revision issued: September, 2007 SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS Ingredients TWA (mg/m3) STEL
This is a commercial product whose exact ratio of components may vary slightly. Minor quantities of other non hazardous ingredients are also possible. The ASCC TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.
SECTION 4 - FIRST AID MEASURES General Information:
You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this MSDS with you when you call.
Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. Skin Contact: Wash gently and thoroughly with water (use non-abrasive soap if necessary) for 5 minutes or until chemical is removed. Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water for 20 minutes or until the product is removed, while holding the eyelid(s) open. Take care not to rinse contaminated water into the unaffected eye or onto the face. Obtain medical attention immediately. Take special care if exposed person is wearing contact lenses. Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor. SECTION 5 - FIRE FIGHTING MEASURES Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire. This product is likely to decompose only after heating to dryness, followed by further strong heating. Fire decomposition products from this product are likely to be irritating if inhaled. Extinguishing Media: Not Combustible. Use extinguishing media suited to burning materials. Fire Fighting: If a significant quantity of this product is involved in a fire, call the fire brigade. Flash point: Does Upper Flammability Limit: Does Lower Flammability Limit: Does Autoignition temperature: Flammability Class: Does SECTION 6 - ACCIDENTAL RELEASE MEASURES Accidental release: In the event of a major spill, prevent spillage from entering drains or water courses. Wear full protective clothing including eye/face protection. All skin areas should be covered. See below under Personal Protection regarding Australian Standards relating to personal protective equipment. Suitable materials for protective clothing include rubber, PVC. Eye/face protective equipment should comprise as a minimum, protective goggles. If there is a significant chance that vapours or mists are likely to build up in the cleanup area, we recommend that you use a respirator. Usually, no respirator is necessary when using this product. However, if you have any doubts consult the Australian Standard mentioned below (section 8). Stop leak if safe to do so, and contain spill. Absorb onto sand, vermiculite or other suitable absorbent material. If spill is too large or if absorbent material is not available, try to create a dike to stop material spreading or going into drains or waterways. Sweep up and shovel or collect recoverable product into labelled containers for recycling or salvage, and dispose of promptly. Recycle containers wherever possible after careful cleaning. After spills, wash area preventing runoff from entering drains. If a significant quantity of material enters drains, advise emergency services. This material may be suitable for approved landfill. Ensure legality of disposal by consulting regulations prior to disposal. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry. MATERIAL SAFETY DATA SHEET
Issued by: Independent Photographic Supplies Pty Ltd
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand) Product Name: Bleach Replenisher Part A 20N2-2235A Page: 3 of 4 This revision issued: September, 2007 SECTION 7 - HANDLING AND STORAGE Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this MSDS for details of personal protective measures, and make sure that those measures are followed. The measures detailed below under "Storage" should be followed during handling in order to minimise risks to persons using the product in the workplace. Also, avoid contact or contamination of product with incompatible materials listed in Section 10. Storage: Store packages of this product in a cool place. Make sure that containers of this product are kept tightly closed. Keep containers dry and away from water. Keep containers of this product in a well ventilated area. Make sure that the product does not come into contact with substances listed under "Incompatibilities" in Section 10. Some liquid preparations settle or separate on standing and may require stirring before use. Check packaging - there may be further storage instructions on the label. SECTION 8 - EXPOSURE CONTROLS AND PERSONAL PROTECTION
The following Australian Standards will provide general advice regarding safety clothing and equipment:
Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Industrial Clothing: AS2919, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. ASCC Exposure limits TWA (mg/m3) STEL
Exposure limits have not been established by ASCC for any of the significant ingredients in this product.
No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: No special ventilation requirements are normally necessary for this product. However make sure that the work environment remains clean and that vapours and mists are minimised. Eye Protection: Protective glasses or goggles should be worn when this product is being used. Failure to protect your eyes may cause them harm. Emergency eye wash facilities are also recommended in an area close to where this product is being used. Skin Protection: You should avoid contact even with mild skin irritants. Therefore you should wear suitable impervious elbow-length gloves and facial protection when handling this product. See below for material types. Protective Material Types: We suggest that protective clothing be made from the following: rubber, PVC. Respirator: Usually, no respirator is necessary when using this product. However, if you have any doubts consult the Australian Standard mentioned above. Eyebaths or eyewash stations should be provided near to where this product is being used. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES: Physical Description & colour: Clear, Odour: No Boiling Point: Freezing/Melting Point: Approximately Volatiles: Vapour Pressure:
2.37 kPa at 20°C (water vapour pressure).
Vapour Density: No Specific Gravity: 1.10 Water Solubility: Volatility: No Odour Threshold: No Evaporation Rate: No Coeff Oil/water distribution: No Autoignition temp: SECTION 10 - STABILITY AND REACTIVITY Reactivity: This product is unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties. Conditions to Avoid: This product should be kept in a cool place, preferably below 30°C. Keep containers tightly closed. Containers should be kept dry. Keep containers and surrounding areas well ventilated. Incompatibilities: strong acids, strong bases, strong oxidising agents. Fire Decomposition: This product is likely to decompose only after heating to dryness, followed by further strong heating. Carbon dioxide, and if combustion is incomplete, carbon monoxide. Nitrogen and its compounds, and under MATERIAL SAFETY DATA SHEET
Issued by: Independent Photographic Supplies Pty Ltd
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand) Product Name: Bleach Replenisher Part A 20N2-2235A Page: 4 of 4 This revision issued: September, 2007
some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Water, bromine compounds. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death. Polymerisation: This product will not undergo polymerisation reactions. SECTION 11 - TOXICOLOGICAL INFORMATION Local Effects: Target Organs: Classification of Hazardous Ingredients
No ingredient mentioned in the HSIS Database is present in this product at hazardous concentrations.
SECTION 12 - ECOLOGICAL INFORMATION SECTION 13 - DISPOSAL CONSIDERATIONS Disposal: There are many pieces of legislation covering waste disposal and they differ in each state and territory, so each user must refer to laws operating in their area. In some areas, certain wastes must be tracked. The Hierarchy of Controls seems to be common - the user should investigate: Reduce, Reuse, and Recycle and only if all else fails should disposal be considered. Note that properties of a product may change in use, so that the following suggestions may not always be appropriate. The following may help you in properly addressing this matter for this product. This product may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use. If it has been contaminated, it may be possible to separate the contamination in some way. Only if neither of these options is suitable, consider landfill. SECTION 14 - TRANSPORT INFORMATION ADG Code: This product is not classified as a Dangerous Good. No special transport conditions are necessary unless required by other regulations. SECTION 15 - REGULATORY INFORMATION AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations. SECTION 16 - OTHER INFORMATION This MSDS contains only safety-related information. For other data see product literature. Acronyms: ADG Code
Australian Code for the Transport of Dangerous Goods by Road and Rail
Australian Inventory of Chemical Substances
Office of the Australian Safety and Compensation Council
Chemical Abstracts Service Registry Number
International Agency for Research on Cancer
Standard for the Uniform Scheduling of Drugs & Poisons
UN Number United
THIS MSDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS MSDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE.
IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS
OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.
Please read all labels carefully before using product.
This MSDS is prepared in accord with the ASCC document “National Code of Practice for the Preparation
of Material Safety Data Sheets” 2nd Edition [NOHSC:2011(2003)]
Copyright Kilford & Kilford Pty Ltd, September, 2007.
http://www.kilford.com.au/ Phone (02)9251 4532
MATERIAL SAFETY DATA SHEET
Issued by: Independent Photographic Supplies Pty Ltd
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
ARTHRITIS: OSTEOARTHRITIS & OSTEOPOROSIS OBJECTIVES At the conclusion of this course, the learner will be able to: 1. List several types of arthritis. 2. Briefly describe rheumatoid arthritis and gout. 3. Detail osteoarthritis and osteoporosis in terms of its etiology, prevalence, pathophysiology, signs and symptoms, complications, diagnosis, prevention and treatment, including pharm
Dr Frances Pitsilis – 2A Dodson Avenue, Milford, Auckland PO Box 31-572, Milford, North Shore City 0741, New ZealandPHONE: +64 9 486 0030 FAX: +64 9 486 0333 EMAIL: firstname.lastname@example.org WEBSITE: www.drfrances.co.nz TOO MUCH OF A GOOD THING? As the warm weather and summer approaches and we are all looking forward to getting more sunshine, feeling a bit brighter that the better weather brings