Technical Data Sheet Issued 01.09.09 DINITROL 6030 Characteristics: Aluminium Putty is a universally applicable 2-c filler putty with a polyester basis. The putty
is especially compact and pore-free. Applications:
Aluminium putty is suitable for the repair of dents in vehicle bodywork, steel constructions,
to strip machine casing and to renovate cement, brickwork, etc.
Dents with up to 15 mm depth can be levelled out on vertical surfaces. Given its high aluminium content, excellent corrosion protection is achieved.
Sanding dust when dry grinding is removed quicker than with standard putties.
Pre-treatment: Body Repair
Sand and buff undercoat and clean well i.e. with silicone remover.
The substrate must be dry and in good condition, free from grease, mill scale and rust.
2-c lacquers: Matt burnish and remove dust and grease.
Sendzimer galvanised or hot-dipped sheets:
Clean with NC thinner or silicone-remover.
Aluminium substrates: Lightly file (given the various aluminium alloys, an adhesion test should always be carried out
Method of Use:
The surface must be free from oil, dust, grease, loose lacquer, paint residues and rust.
Filing the substrate with sandpaper will increase adhesion.
Mix the required amount of putty with 2 − 3% hardening paste and apply immediately.
Working time (pot life) approx. 5 minutes. Depending on the temperature and amount of
hardener, the putty can be filed in 15 − 25 mins.
Body Repair
Die in diesem Merkblatt gemachten Angaben sind das
All data and recommendations are the result of
Ergebnis sorgfältiger Untersuchungen. Soweit sie sich
careful tests by our laboratories. They only can be
auf die Anwendung beziehen, sind sie als Empfehlung
zu betrachten, die dem Erfahrungsstand entsprechen.
correspond to the level of experience of today.
Wegen der Vielseitigkeit der Anwendungs- und
The data are given in good faith. However, in view
Arbeitsweisen können wir jedoch eine Verbindlichkeit
of the multiplicity of possible application and
nicht übernehmen. Es wird daher ein vertragliches
working methods we are not in a position to
Rechtsverhältnis nicht begründet, und es entstehen aus
assume any responsibility or obligations deriving
eventuellen Kaufverträgen keine Nebenverpflichtungen. Technical Data Sheet Issued 01.09.09 DINITROL 6030 Technical data: Body Repair
Note: Opened packages must be used as quickly as possible. Please refer to the safety data sheet or packaging label for safety instructions. Body Repair
Die in diesem Merkblatt gemachten Angaben sind das
All data and recommendations are the result of
Ergebnis sorgfältiger Untersuchungen. Soweit sie sich
careful tests by our laboratories. They only can be
auf die Anwendung beziehen, sind sie als Empfehlung
zu betrachten, die dem Erfahrungsstand entsprechen.
correspond to the level of experience of today.
Wegen der Vielseitigkeit der Anwendungs- und
The data are given in good faith. However, in view
Arbeitsweisen können wir jedoch eine Verbindlichkeit
of the multiplicity of possible application and
nicht übernehmen. Es wird daher ein vertragliches
working methods we are not in a position to
Rechtsverhältnis nicht begründet, und es entstehen aus
assume any responsibility or obligations deriving
eventuellen Kaufverträgen keine Nebenverpflichtungen.
LAWS OF TRINIDAD AND TOBAGO ANTIBIOTICS ACT CHAPTER 30:02 18 of 1948 Current Authorised Pages LAWS OF TRINIDAD AND TOBAGO 2 Chap. 30:02 Antibiotics Index of Subsidiary Legislation Importation of Antibiotics Preparations Order … … … …Approved Pharmaceutical Firms Order … … … …Antibiotics (Conditions for Use) Order (LN 29/1989) … … … Note on the ab
Rheumatoid arthritis (RA) is a systemic condition characterised by pain, swelling and stiffness in multiple joints, often with systemic involvement. Non-specific symptoms, and in particular fatigue, are common. The disease affect 0.5-1% of the general adult population and an increasing incidence with age is noted, with an annual incidence in females: of 36/100000 and in males 14/100000. The disea