Microsoft word - ts33c-5-3-05honeywell.doc

Honeywell
Temperature & Humidity Sensor with
INTRODUCTION
PRODUCT OVERVIEW
Thank you for selecting the Honeywell Temperature and Humidity FEATURES
Sensor with LCD. This device register, display and transmits • Remote temperature and humidity transmission to the main temperature and humidity from the remote location to the designated • Temperature and Humidity LCD display • Case can be wall mounted using built-in hanger • One remote sensor (transmitter) TS33C • 100 feet (30 meters) transmission range without interference • Selection of the temperature display in Celsius or Fahrenheit Please keep this manual handy as you use your new item. It contains • Three available channels for temperature and humidity practical step-by-step instructions, as well as technical specifications A. LED INDICATOR
• Flashes once when the remote sensor transmits a reading to the • Flashes twice when battery power is low. B. BATTERY COMPARTMENT
• After reception is established (the remote temperature and humidity will appear on the main unit’s display), position the remote sensor and the main unit within the effective D. CHANNEL SWITCH
transmission range of 100 feet (30 meters). E. WALL-MOUNT RECESSED HOLE
F. °C/ °F SWITCH
1. Avoid setting manually the time and date on the main unit before the
• Selects the temperature display in Celsius or Fahrenheit remote reading is displayed.
2. The effective operating range may be influenced by the surrounding TS33C SENSOR IS COMPATIBLE WITH ALL HONEYWELL
building materials and how the receiver (main unit) and transmitter WIRELESS WEATHER STATIONS
3. Place the remote sensor so that it faces the main unit (receiver), BEFORE YOU BEGIN
minimizing obstructions such as doors, walls, and furniture. • The remote sensor can be placed indoors or outdoors. 4. Though the remote sensors are weather-resistant, they should be • We recommend using alkaline batteries for the remote sensor placed away from direct sunlight, rain or snow. when temperatures are above 32°F (0°C). We recommend using AA lithium batteries when temperatures are below 32°F (0°C). NOTE: When the temperature falls below freezing, the batteries in
• Avoid using rechargeable batteries. (Rechargeable batteries the outdoor remote sensors may have reduced voltage supply and a
cannot maintain correct power requirements). shorter effective range. We recommend using lithium batteries at
• Insert batteries before first use, matching the polarity in the temperature 32°F (0°C) and below.
ALWAYS install batteries in the remote sensor before the main
• Press RESET after each battery change with a paper clip or
• During an initial setup, place the main unit as close as possible BATTERY INSTALLATION
GETTING STARTED
NOTE: Install the batteries; select the channel and temperature in
After batteries are installed; remote sensor will transmit temperature C° or F° before mounting the remote sensor.
and humidity readings at 45 second intervals. • Remove the screws from the battery compartment with a small The main unit may take up to two minutes to receive the initial readings. Upon successful reception, remote temperature and humidity will • Set the channel. The switch is located in the battery appear on the main unit’s display. The main unit will automatically compartment. Channel 1 is typically selected if only one remote • Install 2 “AA” size alkaline batteries (not included) matching LOST COMMUNICATION
the polarities shown in the battery compartment. If the main unit display line for the remote sensor reading goes blank, • Replace the battery compartment door and secure the screws. refer to the main unit’s User Manual to find out the way to begin a new • Secure remote sensor in the desired location. signal search. If the signal still isn’t received, please make sure that: • The remote sensor is in its proper location. • The distance between main unit and remote sensor is not over LOW BATTERY WARNING
• The path between units is clear of obstacles. Shorten the and humidity reading line of the main unit, warning that the remote • Fresh batteries are installed correctly in both remote sensor and PLACEMENT OF THE REMOTE SENSOR
The remote sensor can be mounted on the wall using the recessed screw If there is no reception, please perform the following steps: hole or placed on a flat surface indoors or outdoors. • Bring the main unit and remote sensor close together. • Remove four (4) small screws from the back of the remote sensor with small Phillips screwdriver, and open the battery • Remove the batteries from the battery compartment and reinstall them in the same manner. Remote sensor LED indicator will flash showing transmission of the signal. • Remove the batteries from the main unit and reinstall them in SPECIFICATIONS
Remote Temperature Proposed operating range with alkaline batteries: • The remote temperature and humidity appeared on the main -20.0°C to + 70.0°C/-4.0°F to + 158°F unit’s display will show that transmission is being received Proposed operating range with lithium batteries: -38.8°C to + 70.0°C/-38.0°F to +158°F LCD display of registered temperature and humidity Remote Humidity TRANSMISSION COLLISION
Signals from the other household devices such as wireless doorbells, Humidity Resolution: 1% Low battery indicator home security systems, and entry control, may interfere with this product or cause temporary reception interruption. This is normal and Maximum number of transmission channels: three (3) RF transmission range: Maximum 100 feet (30 meters) will not affect the general performance of the product. The transmission Temperature transmission cycle: approximately 45 seconds and reception of the temperature and humidity readings will resume Wall Mount or Desktop option
Power

2 AA size (UM-3) 1.5V batteries (not included) Dimensions
2.37(L) x 4(H) x 1(D) inch
PRECAUTIONS
This product is engineered to give you years of satisfactory service if
handled carefully. Here are a few precautions: • Do not immerse the unit in water. • Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits. • Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts. • Do not tamper with the unit’s internal components. Doing so will invalidate the warranty and may cause damage. This unit • Use only fresh batteries. Do not mix new and old batteries. • Read the user's manual thoroughly before operating the unit. FCC STATEMENT
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference Address: 7865 SW Mohawk, Tualatin, OR 97062 received, including interference that may cause undesired operation. Warning: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority Product Name: Temperature and Humidity Sensor with LCD NOTE: This equipment had been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment, is in conformity with Part 15 of the FCC Rules. Operation is subject to installed and used in accordance with the instructions, may cause harmful interference to radio communications. This device may not cause harmful interference. There is no guarantee that interference will not occur in a particular This device must accept any interference received, including installation. If this equipment does cause harmful interference to radio interference that may cause undesired operation. or television reception, which can be determined by turning the equipment off and on, the user is encouraged to improve or correct turning the interference by one or more of the following measures: The information above is not to be used as a contact for support or
sales. Please call our customer service hotline (refer to the Standard
• Reorient or relocate the receiving antenna Warranty Information) for all injuries instead.
• Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for STANDARD WARRANTY INFORMATION
This product is warranted from manufacturing defects for one year from
date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized Note that online product registration is required to ensure valid To register your product, go to our Company website at: www.honeywellweatherstations.com. Click Online Product Registration Should you require assistance with this product and its operation, please contact our Customer Service Hotline 1(866) 443 3543. Please direct all returns to the place of the original purchase. Should this not be possible, contact Hideki Customer Service Hotline for assistance and to obtain a Return Merchandise Authorization (RMA). Returns without a return authorization will be refused. Please retain your original receipt as you may be asked to provide a copy for proof of Hideki Electronics, Inc. reserves the right to repair or replace the Copyright (2005) Hideki Electronics Inc. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell Honeywell International Inc. makes no representations or warranties

Source: http://suportclickshop.ro/manuale/TS33C%20User%20Manual.pdf

4th quiz exam 1425-2005.doc

ﻢﯿﺣﺮﻟا ﻦﻤﺣﺮﻟا ﷲا ﻢﺴﺑ 4th Quiz Examination 4th YEAR MEDICINE DEPARTMENT OF PHARMACOLOGY FACULTY OF MEDICINE – KAAU - ACADEMIC YEAR 1425/26 H Saturday 24 – 1 – 1426 H / 5 – 3 – 2005G. 12.00 – 1.00 PM. INSTRUCTIONS 1- WRITE YOUR NAME and fill in the COMPUTER SERIAL NUMBER on the computer answer sheet . 2- Selec

Check your data more efficiently

Paper number: TT02 CHECK YOUR DATA MORE EFFICIENTLY Jian Hua (Daniel) Huang, Forest Laboratories Inc, NJ ABSTRACT: %CHKDATA is a SAS macro program designed to check the data in an efficient and user-friendly way. First, the macro can check the data structure by generating three types of key information: the contents of dataset, its associated SAS format, and a collection of all vari

© 2010-2014 Pdf Medical Search