Chemwatch msds 6597-83

MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 1 of 9
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
MIROTHANE PU 5747 HARDENER
SYNONYMS
PROPER SHIPPING NAME
RESIN SOLUTION, flammable
RESIN SOLUTION
PRODUCT USE
Hardener for polyurethane coatings.
HAZARD RATINGS
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the Criteria of NOHSC, and the ADG Code.
POISONS SCHEDULE
Harmful by inhalation and in contact with skin.
Irritating to eyes, respiratory system and skin.
Limited evidence of a carcinogenic effect.
May cause SENSITISATION by inhalation.
May cause SENSITISATION by skin contact.
HARMFUL- May cause lung damage if swallowed.
Vapours may cause drowsiness and dizziness.
Keep away from sources of ignition. No smoking.
Keep container in a well ventilated place.
Avoid exposure - obtain special instructions before use.
To clean the floor and all objects contaminated by thismaterial, use water and detergent.
This material and its container must be disposed of in asafe way.
Keep away from food, drink and animal feeding stuffs.
Take off immediately all contaminated clothing.
In case of contact with eyes, rinse with plenty of water andcontact Doctor or Poisons Information Centre.
This material and its container must be disposed of as continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 2 of 9
Section 2 - HAZARDS IDENTIFICATION
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
toluene diisocyanate/ hexamethylene diisocyanate copolymer Section 4 - FIRST AID MEASURES
SWALLOWED
If spontaneous vomiting appears imminent or occurs, hold patient's head down, lower than their hips to help avoid possible
aspiration of vomitus.
· If swallowed do NOT induce vomiting.
· If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and
prevent aspiration.
Avoid giving milk or oils.
Avoid giving alcohol.
If this product comes in contact with the eyes:
· Wash out immediately with fresh running water.
· Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting
the upper and lower lids.
If skin contact occurs:
· Immediately remove all contaminated clothing, including footwear
· Flush skin and hair with running water (and soap if available).
· If fumes or combustion products are inhaled remove from contaminated area.
· Lay patient down. Keep warm and rested.
NOTES TO PHYSICIAN
Any material aspirated during vomiting may produce lung injury. Therefore emesis should not be induced mechanically orpharmacologically. Mechanical means should be used if it is considered necessary to evacuate the stomach contents; these includegastric lavage after endotracheal intubation. If spontaneous vomiting has occurred after ingestion, the patient should bemonitored for difficult breathing, as adverse effects of aspiration into the lungs may be delayed up to 48 hours.
for simple esters:--------------------------------------------------------------BASIC TREATMENT--------------------------------------------------------------· Establish a patent airway with suction where necessary.
· Watch for signs of respiratory insufficiency and assist ventilation as necessary.
· Administer oxygen by non-rebreather mask at 10 to 15 l/min.
· Monitor and treat, where necessary, for pulmonary oedema .
· Monitor and treat, where necessary, for shock.
· DO NOT use emetics. Where ingestion is suspected rinse mouth and give up to 200 ml water (5 ml/kg recommended) for dilutionwhere patient is able to swallow, has a strong gag reflex and does not drool.
· Give activated charcoal.
--------------------------------------------------------------ADVANCED TREATMENT--------------------------------------------------------------· Consider orotracheal or nasotracheal intubation for airway control in unconscious patient or where respiratory arrest hasoccurred.
· Positive-pressure ventilation using a bag-valve mask might be of use.
· Monitor and treat, where necessary, for arrhythmias.
· Start an IV D5W TKO. If signs of hypovolaemia are present use lactated Ringers solution. Fluid overload might createcomplications.
· Drug therapy should be considered for pulmonary oedema.
· Hypotension with signs of hypovolaemia requires the cautious administration of fluids. Fluid overload might createcomplications.
· Treat seizures with diazepam.
· Proparacaine hydrochloride should be used to assist eye irrigation.
continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 3 of 9
Section 4 - FIRST AID MEASURES
--------------------------------------------------------------EMERGENCY DEPARTMENT--------------------------------------------------------------· Laboratory analysis of complete blood count, serum electrolytes, BUN, creatinine, glucose, urinalysis, baseline for serumaminotransferases (ALT and AST), calcium, phosphorus and magnesium, may assist in establishing a treatment regime. Other usefulanalyses include anion and osmolar gaps, arterial blood gases (ABGs), chest radiographs and electrocardiograph.
· Positive end-expiratory pressure (PEEP)-assisted ventilation may be required for acute parenchymal injury or adult respiratorydistress syndrome.
· Consult a toxicologist as necessary.
BRONSTEIN, A.C. and CURRANCE, P.L. EMERGENCY CARE FOR HAZARDOUS MATERIALS EXPOSURE: 2nd Ed. 1994.
For sub-chronic and chronic exposures to isocyanates:· This material may be a potent pulmonary sensitiser which causes bronchospasm even in patients without prior airwayhyperreactivity.
· Clinical symptoms of exposure involve mucosal irritation of respiratory and gastrointestinal tracts.
· Conjunctival irritation, skin inflammation (erythema, pain vesiculation) and gastrointestinal disturbances occur soon afterexposure.
· Pulmonary symptoms include cough, burning, substernal pain and dyspnoea.
· Some cross-sensitivity occurs between different isocyanates.
· Noncardiogenic pulmonary edema and bronchospasm are the most serious consequences of exposure. Markedly symptomatic patientsshould receive oxygen, ventilatory support and an intravenous line.
· Treatment for asthma includes inhaled sympathomimetics (epinephrine [adrenalin], terbutaline) and steroids.
· Activated charcoal (1 g/kg) and a cathartic (sorbitol, magnesium citrate) may be useful for ingestion.
· Mydriatics, systemic analgesics and topical antibiotics (Sulamyd) may be used for corneal abrasions.
· There is no effective therapy for sensitised workers.
[Ellenhorn and Barceloux; Medical Toxicology]NOTE: Isocyanates cause airway restriction in naive individuals with the degree of response dependant on the concentration andduration of exposure. They induce smooth muscle contraction which leads to bronchoconstrictive episodes. Acute changes in lungfunction, such as decreased FEV1, may not represent sensitivity.
[Karol & Jin, Frontiers in Molecular Toxicology, pp 56-61, 1992].
For acute or short term repeated exposures to petroleum distillates or related hydrocarbons:· Primary threat to life, from pure petroleum distillate ingestion and/or inhalation, is respiratory failure.
· Patients should be quickly evaluated for signs of respiratory distress (e.g. cyanosis, tachypnoea, intercostal retraction,obtundation) and given oxygen. Patients with inadequate tidal volumes or poor arterial blood gases (pO2 50 mm Hg) should beintubated.
· Arrhythmias complicate some hydrocarbon ingestion and/or inhalation and electrocardiographic evidence of myocardial injury hasbeen reported; intravenous lines and cardiac monitors should be established in obviously symptomatic patients. The lungs excreteinhaled solvents, so that hyperventilation improves clearance.
· A chest x-ray should be taken immediately after stabilisation of breathing and circulation to document aspiration and detectthe presence of pneumothorax.
· Epinephrine (adrenalin) is not recommended for treatment of bronchospasm because of potential myocardial sensitisation tocatecholamines. Inhaled cardioselective bronchodilators (e.g. Alupent, Salbutamol) are the preferred agents, with aminophylline asecond choice.
· Lavage is indicated in patients who require decontamination; ensure use of cuffed endotracheal tube in adult patients.
[Ellenhorn and Barceloux: Medical Toxicology].
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
· Foam.
· Dry chemical powder.
· BCF (where regulations permit).
· Carbon dioxide.
· Water spray or fog - Large fires only.
FIRE FIGHTING
· Alert Fire Brigade and tell them location and nature of hazard.
· May be violently or explosively reactive.
· Wear breathing apparatus plus protective gloves.
· Prevent, by any means available, spillage from entering drains or water course.
· Consider evacuation (or protect in place).
· Fight fire from a safe distance, with adequate cover.
· If safe, switch off electrical equipment until vapour fire hazard removed.
· Use water delivered as a fine spray to control the fire and cool adjacent area.
· Avoid spraying water onto liquid pools.
· Do not approach containers suspected to be hot.
· Cool fire exposed containers with water spray from a protected location.
· If safe to do so, remove containers from path of fire.
FIRE/EXPLOSION HAZARD
· Liquid and vapour are highly flammable.
continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 4 of 9
Section 5 - FIRE FIGHTING MEASURES
· Severe fire hazard when exposed to heat, flame and/or oxidisers.
· Vapour may travel a considerable distance to source of ignition.
· Heating may cause expansion or decomposition leading to violent rupture of containers.
· On combustion, may emit toxic fumes of carbon monoxide (CO).
Combustion products include: carbon dioxide (CO2), isocyanates, and minor amounts of, hydrogen cyanide, nitrogen oxides (NOx)
, other pyrolysis products typical of burning organic material.
Contains low boiling substance: Closed containers may rupture due to pressure
buildup under fire conditions.
Flooding quantities of water only.
· Small quantities of water in contact with hot liquid may react violently with generation of a large volume of rapidly expanding
hot sticky semi-solid foam.
· Presents additional hazard when fire fighting in a confined space.
· Cooling with flooding quantities of water reduces this risk.
FIRE INCOMPATIBILITY
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may
result.
HAZCHEM: 3[Y]E
Personal Protective Equipment
Breathing apparatus.
Gas tight chemical resistant suit.
Limit exposure duration to 1 BA set 30 mins.
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
· Remove all ignition sources.
· Clean up all spills immediately.
· Avoid breathing vapours and contact with skin and eyes.
· Control personal contact by using protective equipment.
· Contain and absorb small quantities with vermiculite or other absorbent material.
· Wipe up.
· Collect residues in a flammable waste container.
MAJOR SPILLS
Treat isocyanate spills with sufficient amounts of isocyanate decontaminant preparation. Typically, such a preparation mayconsist of: sawdust: 20 parts by weight Kieselguhr 40 parts by weight plus a mixture of {ammonia (s.g. 0.880) 8% v/v non-ionicsurfactant 2% v/v water 90% v/v}. Let stand for 24 hours.
· Clear area of personnel and move upwind.
· Alert Fire Brigade and tell them location and nature of hazard.
· May be violently or explosively reactive.
· Wear breathing apparatus plus protective gloves.
· Prevent, by any means available, spillage from entering drains or water course.
· Consider evacuation (or protect in place).
· No smoking, naked lights or ignition sources.
· Increase ventilation.
· Stop leak if safe to do so.
· Water spray or fog may be used to disperse /absorb vapour.
· Contain spill with sand, earth or vermiculite.
· Use only spark-free shovels and explosion proof equipment.
· Collect recoverable product into labelled containers for recycling.
· Absorb remaining product with sand, earth or vermiculite.
· Collect solid residues and seal in labelled drums for disposal.
· Wash area and prevent runoff into drains.
· If contamination of drains or waterways occurs, advise emergency services.
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 5 of 9
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
· Containers, even those that have been emptied, may contain explosive vapours.
· Do NOT cut, drill, grind, weld or perform similar operations on or near containers.
· Overheating of ethoxylates in air should be avoided. When some ethoxylates are heated vigorously in the presence of air or
oxygen, at temperatures exceeding 160 C, they may undergo exothermic oxidative degeneration resulting in self-heating and
autoignition.
· Nitrogen blanketing will minimise the potential for ethoxylate oxidation.
· Trace quantities of ethylene oxide may be present in the material. Although these may accumulate in the headspace of storage
and transport vessels, concentrations are not expected to exceed levels which might produce a flammability or worker exposure
hazard.
· Avoid all personal contact, including inhalation.
· Wear protective clothing when risk of exposure occurs.
· Use in a well-ventilated area.
· Prevent concentration in hollows and sumps.
· DO NOT enter confined spaces until atmosphere has been checked.
· Avoid smoking, naked lights, heat or ignition sources.
· When handling, DO NOT eat, drink or smoke.
· Vapour may ignite on pumping or pouring due to static electricity.
· DO NOT use plastic buckets.
· Earth and secure metal containers when dispensing or pouring product.
· Use spark-free tools when handling.
· Avoid contact with incompatible materials.
· Keep containers securely sealed.
· Avoid physical damage to containers.
· Always wash hands with soap and water after handling.
· Work clothes should be laundered separately.
· Use good occupational work practice.
· Observe manufacturer's storing and handling recommendations.
· Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions.
DO NOT allow clothing wet with material to stay in contact with skin.
SUITABLE CONTAINER
· Packing as supplied by manufacturer.
· Plastic containers may only be used if approved for flammable liquid.
· Check that containers are clearly labelled and free from leaks.
· For low viscosity materials (i) : Drums and jerry cans must be of the non-removable head type. (ii) : Where a can is to be used
as an inner package, the can must have a screwed enclosure.
· For materials with a viscosity of at least 2680 cSt. (23 deg. C)
· For manufactured product having a viscosity of at least 250 cSt. (23 deg. C)
· Manufactured product that requires stirring before use and having a viscosity of at least 20 cSt (25 deg. C)
(i) : Removable head packaging;
(ii) : Cans with friction closures and
(iii) : low pressure tubes and cartridges may be used.
· Where combination packages are used, and the inner packages are of glass, there must be sufficient inert cushioning material in
contact with inner and outer packages
· In addition, where inner packagings are glass and contain liquids of packing group I there must be sufficient inert absorbent
to absorb any spillage, unless the outer packaging is a close fitting moulded plastic box and the substances are not incompatible
with the plastic.
STORAGE INCOMPATIBILITY
Avoid strong acids, bases.
Avoid reaction with water, alcohols, strong bases, alkalis, metal compounds and detergent solutions. Reacts with water, may
generate a large volume of foam, carbon dioxide gas (CO2) and heat. Foaming in confined space may produce pressure. Isocyanates
will attack and embrittle some plastics and rubbers.
· Esters react with acids to liberate heat along with alcohols and acids.
· Strong oxidising acids may cause a vigorous reaction with esters that is sufficiently exothermic to ignite the reaction
products.
· Heat is also generated by the interaction of esters with caustic solutions.
· Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.
· Esters may be incompatible with aliphatic amines and nitrates.
Avoid reaction with oxidising agents.
STORAGE REQUIREMENTS
· Store in original containers in approved flame-proof area.
· No smoking, naked lights, heat or ignition sources.
· DO NOT store in pits, depressions, basements or areas where vapours may be trapped.
· Keep containers securely sealed.
· Store away from incompatible materials in a cool, dry well ventilated area.
· Protect containers against physical damage and check regularly for leaks.
continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 6 of 9
Section 7 - HANDLING AND STORAGE
· Observe manufacturer's storing and handling recommendations.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
Source
Material
_________________
__________________ _____
Australia Exposure
hexamethylene
Standards
diisocyanate
polymer
(Isocyanates,all
(as- NCO))
Australia Exposure
Standards
diisocyanate/
hexamethylene
diisocyanate
copolymer
(Isocyanates,all
(as- NCO))
PERSONAL PROTECTION
RESPIRATOR
· Safety glasses with side shields.
· Chemical goggles.
· Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document,describing the wearing of lens or restrictions on use, should be created for each workplace or task. This should include a reviewof lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aidpersonnel should be trained in their removal and suitable equipment should be readily available. In the event of chemicalexposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at the firstsigns of eye redness or irritation - lens should be removed in a clean environment only after workers have washed handsthoroughly. [CDC NIOSH Current Intelligence Bulletin 59].
HANDS/FEET
Suitability and durability of glove type is dependent on usage. Factors such as:· frequency and duration of contact,· chemical resistance of glove material,· glove thickness and· dexterity,are important in the selection of gloves.
Wear chemical protective gloves, eg. PVC.
Wear safety footwear or safety gumboots, eg. Rubber.
NOTE: The material may produce skin sensitisation in predisposed individuals. Care must be taken, when removing gloves and otherprotective equipment, to avoid all possible skin contact.
· Overalls.
· PVC Apron.
· PVC protective suit may be required if exposure severe.
· Eyewash unit.
· Ensure there is ready access to a safety shower.
ENGINEERING CONTROLS
CARE: Use of a quantity of this material in confined space or poorly ventilated area, where rapid build up of concentratedatmosphere may occur, could require increased ventilation and/or protective gear.
For flammable liquids and flammable gases, local exhaust ventilation or a process enclosure ventilation system may be required.
Ventilation equipment should be explosion-resistant.
Spraying of material or material in admixture with other components must be carried out in conditions conforming to local stateregulations. Local exhaust ventilation with full face air supplied breathing apparatus (hood or helmet type) is normallyrequired. Unprotected personnel must vacate spraying area.
NOTE: Isocyanate vapours will not be adequately absorbed by organic vapour respirators.
continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 7 of 9
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Clear to pale yellow highly flammable liquid with a strong solvent odour; not miscible with water. Will react with water to
produce carbon dioxide and form a solid.
PHYSICAL PROPERTIES
Liquid.
Does not mix with water.
Floats on water.
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
· Presence of incompatible materials.
· Product is considered stable.
· Hazardous polymerisation will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
HARMFUL- May cause lung damage if swallowed.
May cause SENSITISATION by inhalation.
May cause SENSITISATION by skin contact.
Limited evidence of a carcinogenic effect.
system and skin.
Vapours may cause dizziness or suffocation.
Vapours may cause drowsiness and dizziness.
TOXICITY AND IRRITATION
unless otherwise specified data extracted from RTECS - Register of Toxic Effects of Chemical SubstancesTOXICITY The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.
The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scalingAsthma-like symptoms may continue for months or even years after exposure to the material ceases. This may be due to a non-allergenic condition known as reacAllergic reactions involving the respiratory tract are usually due to interactions between IgE antibodies and allergens and occur rapidly. Allergic potential of the alleAttention should be paid to atopic diathesis, characterised by increased susceptibility to nasal inflammation, asthma and eczema.
Exogenous allergic alveolitis is induced essentially by allergen specific immune-complexes of the IgG type; cell-mediated reactions (T lymphocytes) may be involvContact allergies quickly manifest themselves as contact eczema, more rarely as urticaria or Quincke's oedema. The pathogenesis of contact eczema involves a c MATERIAL
CARCINOGEN
REPROTOXIN
SENSITISER
________________________ ____________________ ________________ ________________ ________________
hexamethylene
diisocyanatepolymer
toluene diisocyanate/
hexamethylene
diisocyanatecopolymer
SENSITISER
AUOEL: Australia Exposure Standards- Sensitisers:hexamethylenediisocyanatepolymer
SENSITISER
AUOEL: Australia Exposure Standards- Sensitisers:toluene diisocyanate/hexamethylenediisocyanatecopolymer
continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 8 of 9
Section 12 - ECOLOGICAL INFORMATION
Marine Pollutant:Not Determined
Harmful to aquatic organisms.
This material and its container must be disposed of as hazardouswaste.
Section 13 - DISPOSAL CONSIDERATIONS
· Recycle wherever possible.
· Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitable
treatment or disposal facility can be identified.
· Dispose of by: Burial in a licenced land-fill or Incineration in a licenced apparatus (after admixture with suitable
combustible material).
· Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.
· Containers may still present a chemical hazard/ danger when empty.
· Return to supplier for reuse/ recycling if possible.
Otherwise:
· If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to
store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill.
· Where possible retain label warnings and MSDS and observe all notices pertaining to the product.
Section 14 - TRANSPORTATION INFORMATION
Labels Required: FLAMMABLE LIQUIDHAZCHEM: 3[Y]E Shipping Name:RESIN SOLUTION, flammableRESIN SOLUTION, flammable Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE: S5
REGULATIONS
hexamethylenediisocyanatepolymer (CAS: 28182-81-2)is found on the following regulatorylists;
Australia - New South Wales HazardousSubstancesRequiring Health Surveillance
Australia - Tasmania HazardousSubstancesRequiring Health Surveillance
Australia - Western Australia HazardousSubstancesRequiring Health Surveillance
Australia Exposure Standards
Australia HazardousSubstancesRequiring Health Surveillance
Australia Inventoryof Chemical Substances(AICS)
Australia OccupationalHealth and Safety (CommonwealthEmployment)(National Standards)Regulations1994 - HazardousSubstances
Requiring Health Surveillance
Australia Poisons Schedule
Australia Standard for the Uniform Schedulingof Drugs and Poisons (SUSDP) - Schedule 6
hexamethylenediisocyanatepolymer (CAS: 53200-31-0)is found on the following regulatorylists;
Australia - New South Wales HazardousSubstancesRequiring Health Surveillance
Australia - Tasmania HazardousSubstancesRequiring Health Surveillance
Australia - Western Australia HazardousSubstancesRequiring Health Surveillance
Australia Exposure Standards
Australia HazardousSubstancesRequiring Health Surveillance
Australia OccupationalHealth and Safety (CommonwealthEmployment)(National Standards)Regulations1994 - HazardousSubstances
Requiring Health Surveillance
Australia Standard for the Uniform Schedulingof Drugs and Poisons (SUSDP) - Schedule 6
toluene diisocyanate/hexamethylenediisocyanatecopolymer(CAS: 63368-95-6)is found on the following regulatorylists;
Australia - New South Wales HazardousSubstancesRequiring Health Surveillance
Australia - Tasmania HazardousSubstancesRequiring Health Surveillance
Australia - Western Australia HazardousSubstancesRequiring Health Surveillance
Australia Exposure Standards
continued.
MIROTHANE PU 5747 HARDENER
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007
CHEMWATCH 6597-83
CC317SCP
Version No:2
CD 2007/1 Page 9 of 9
Section 15 - REGULATORY INFORMATION
Australia HazardousSubstancesRequiring Health Surveillance
Australia Inventoryof Chemical Substances(AICS)
Australia OccupationalHealth and Safety (CommonwealthEmployment)(National Standards)Regulations1994 - HazardousSubstances
Requiring Health Surveillance
Australia Standard for the Uniform Schedulingof Drugs and Poisons (SUSDP) - Schedule 6
Section 16 - OTHER INFORMATION
INGREDIENTS WITH MULTIPLE CAS NUMBERS
Ingredient Name
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or criticism, as permitted under the Copyright Act,no part may be reproduced by any process without written permission from CHEMWATCH. TEL (+61 3) 9572 4700. Issue Date: 19-Mar-2007
Print Date: 19-Mar-2007

Source: http://www.versatileproducts.co.nz/site/versatile/files/MSDS%20Sheets/5747.pdf